Adjust by Hand Roll Forming Machine With Hydraulic Decoiler
0.7-1.8mm
C channel High Speed Roll Forming Machine 0.7-1.8mm
1. Specification of the material
| 1 | Suitable Material | HRC material, G550 |
| 2 | Width of the raw material | Base on profile |
2. Machine Detailed Parameters
| 1 | Roll Forming
| C channel High Speed Roll Forming Machine
|
| 2 | Machine structure
| Wire-electrode cutting structure |
| 3 | Total power | Motor power-11kw Hydraulic power-7.5kw Servo power: 3kw |
| 4 | Roller stations |
About 14 stations + one station for rectify
|
| 5 | Productivity
| 0.7-1.0mm, 0-40m/min 1.0-1.5mm, 0-30m/min 1.5-1.8mm, 0-15m/min |
| 6 | Drive system
| By chain |
| 7 | Diameter of shaft
| ￠70mm solid shaft |
8 | Voltage
| 220V 60Hz 3phases (Customized) |
| 9 | Color Of The Machine
| Yellow and blue |
| 10 | Deliver Time
| 70 days |
| 11 | Terms Of Payment
| 30%T/T 70% pay before shipment |
3. Profile drawing
4. The Chart of Process Flow
5. Specification of Components
(1) 5T hydraulic decoiler
- Steel coil width: 550 mm;
- Internal diameter of coil: variable, from380 mm to 520 mm
- Maximal out diameter:1200mm
- Maximum coil weight: 5T
- Main motor power: 5.5KW
(2) Main Roll Forming Machine
- Roller material: Gcr15, quenching treamtment, HRC58-62
- Shaft diameter: ￠70mm material: SAE1045 with tempering
- Change size by hand wheel
- To avoid accidents, the driven parts will be covered with the
protective cover
(3) Machine Structure
- Main frameby steel plate welding
- Machine structure: Wire-electrode cutting
- By chain
(4) Track cutting system
- Adopt the hydraulic cutting
- Cutting after forming: Cut the sheet after roll forming to required
length
- Material of blade:Cr12, 58-62 HRC hardness
- Cutting power by hydraulic,7.5KW
- Servo power: 3KW
(5) Hydraulic System
- Hydraulic power: 7.5kw
- Working pressure: maximal 25Mpa
- Solenoid valve: 1 group
- Hydraulic oil: 46# hydraulic oil
(6) Computer Control Cabinet
- Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Computer used to control length & quantity. Machine will
automatically cut to length and stop when required quantity is
achieved
- PLC: Panasonic or customerization
FAQ
Q: Can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
Q: How do you guarantee the quality of the products?
A: Strict product quality, unqualified resolute don't factory.This
is the tenet of our factory
Every one of our products have strict testing procedures, must be
100% quality assurance.
Q: How can we be assured that you will deliver us quality machine
with spare parts?
A:1. Customers to send the technical people to our factory for
checking the quality.
2.We can send the technicians to the buyer`s factory for the
installation of the machine.
3.Good aftersales-service, its free of charge during the warranty
period.
